Cool Automation CoolMaster 3000T Specifiche Scaricare il pdf (Pagina 12)

12 Powermonitor 3000 Master Module

Publication 1404-IN007F-EN-P - November 2009

Install the Powermonitor 3000 Unit

Only qualified personnel should install, wire, service, and maintain this equipment. Refer to

and follow the safety guidelines and pay attention to all warnings and notices in these

instructions.

See Product Dimensions on page 14

for mounting hole dimensions.

Mount the master module with four No. 8-32 UNC or M4 screws with flat washers and lock

washers.

Mounting Considerations

Mount the Powermonitor 3000 master module in a suitable protective enclosure. Select an

enclosure that protects the master module from atmospheric contaminants, such as oil, water,

moisture, dust corrosive vapors and other harmful airborne substances. The enclosure should

also protect against personal contact with energized circuits.

The ambient temperature within the enclosure must remain within the limits listed in the

Specifications, page 56

Select an enclosure that provides adequate clearance for ventilation and wiring for the power

monitor and other equipment to be installed within the enclosure.

See Product Dimensions on page 14 for dimensions and spacing guidelines for the power

monitor.

When installed within a substation or switchgear lineup, we recommend that the power

monitor be mounted within a low-voltage cubicle, isolated from medium- and high-voltage

circuits.

ATTENTION

Electrostatic discharge can damage integrated circuits or semiconductors. Follow these

guidelines when you handle the module:

• Touch a grounded object to discharge static potential.

• Wear an approved wrist strap grounding device.

• Do not open the module or attempt to service internal components.

• Use a static safe work station, if available.

• Keep the module in its static shield bag when not in use.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 63 64

Nessun commento

Cool Automation CoolMaster 3000T Specifiche Pagina 12